Audio [req] need to repair a headphone

scottwilly

Disciple
May 23, 2011
73
5
21
36
I have a Razer headphone (3.5k worth).The sound on one of the sides keeps breaking.
As per my inspection, the soldered connection is fine but the wire has broken near the end.
Where do I get it fixed in hyderabad?

Thanks.
 

fLUX

Skilled
Nov 21, 2009
1,073
202
153
35
Bangalore
@ALPHA17
what is CTC ? , i have a denon d1100 which is working perfectly fine but the hinges which hold the cusps have broken ... Can anyone repair it or make a new structure itself and provide headphone .
Tagging @titana also since you lot of DIY :) , if you can do it also i dont mind sending the headphones to you :)
 
Last edited by a moderator:

FaH33m

Analog Vibes
Skilled
Apr 29, 2006
4,937
261
223
34
All I do is cut off the 3.5mm connector and replace (solder ) a new one . I make sure I get a high quality 3.5mm connectors from Paillics which can be reused incase the connection gets lose in the future. They cost about ~250-300 each . One can also use locally bought 3.5mm connectors which cost 50-100 bucks .

If you are not good at soldering, you can take it to any local electronics repair shop and they will do it for you. :)
 

vivek.krishnan

BLR~ZRS-TX-1-MX
Skilled
Dec 18, 2009
7,863
1,996
303
Ghatkopar, Mumbai
plus.google.com
All I do is cut off the 3.5mm connector and replace (solder ) a new one . I make sure I get a high quality 3.5mm connectors from Paillics which can be reused incase the connection gets lose in the future. They cost about ~250-300 each . One can also use locally bought 3.5mm connectors which cost 50-100 bucks .

If you are not good at soldering, you can take it to any local electronics repair shop and they will do it for you. :)

Thats the issue, bro. Before in my area there were two shops which used to do the same, now both dont :(

So told Divyesh to contact you :)
 

fLUX

Skilled
Nov 21, 2009
1,073
202
153
35
Bangalore
@FaH33m
My headphone holding itself is broken , headphone is working perfectly fine :)
See if you can do something of it can send you pics later on if u need
 
Last edited by a moderator:

scottwilly

Disciple
May 23, 2011
73
5
21
36
Went to CTC and got the broken part of the wire cut off and then re-soldered. it's working fine now.
The guy took about 10 minutes to fix it and 200 from me for this :annoyed: