[Help] Port forwarding in Belkin Wireless G router

B

bodmas

Adept
Hello Friends,
I am using HFCL connect broadband in PPPoE mode. My ports are successfully forwarded when connected to direct modem. But after connecting to Wifi [Belkin wireless G], Ports are again jammed.
I have disabled DHCP in Belkin router and paste the ips in TCP/IP settings i.e
IP Address: 192.168.2.4
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
Preferred DNS Server: 202.164.51.21
Alternate DNS Server: 202.164.32.82

Internet is working fine but Ports are not forwarded yet. I have checked it through https://www.grc.com/x/portprobe=5000 Please guide me accordingly.
 
Could you post a screenshot of the settings page of the router where you are placing the port forward details.
 
@asingh ~ yeah sure. I am uploading Modem + Router screenshots.

Modem [All settings in one screenshot]



Uploaded with ImageShack.us

Router [Main page screenshot - Please tell me if more screenshots to be upload]



Uploaded with ImageShack.us

Do let me know if you want to know anything more.
 
bodmas said:
@asingh ~ yeah sure. I am uploading Modem + Router screenshots.

Router [Main page screenshot - Please tell me if more screenshots to be upload]



Uploaded with ImageShack.us

Do let me know if you want to know anything more.
Click to expand...
Check the firewall section. if nothing else works, enable DMZ(found under firewall section);)
 
@Gaurish ~ At Belkin Router> Firewall> DMZ ask for the private ip. What IP should i give. If i give router IP i.e. 192.168.2.1 then it says
The host IP address is invalid. It should not be the Router`s LAN IP.
Click to expand...

DMZ settings of router:



Screenshot of MODEM DMZ settings:



@asingh ~
Would not the IP inserted be the IP the router assigns to your machine..?
Click to expand...
I am not getting you bro.
 
Back
Top