Budget 21-30k Basic pc

[Leshy]

Hi all i need suggstions for a basic PC under 30k for my dad who runs ameature radio software
I need the following components
1.CPU
2. Motherboard
3. RAM
4. PSU
5. SSD
6. cabinet

 

[nRiTeCh]

Ameature radio software? Can you elaborate more on this.

Does he streams?

 

[VighneshPath]

1. Ryzen 5 5600 - 14k
2. MSI B450 - 6-7k
3. 8 gb ram, you can upgrade it later on, but should be fine for radio software imo - 1.9k
4. 450 Watt PSU Gigabyte - 2.5k
5. 240gb ssd - 1.5k
6. Antec AX20 - 3k

Should be a decent build, around 30k.

 

[Leshy]

Ameature radio software? Can you elaborate more on this.

Does he streams?

My dad uses certain software ex. DVSwitch for his hobby. Nope, he does not stream. https://en.wikipedia.org/wiki/Amateur_radio
Below i have attached a config need your suggestions

 

[BullettuPaandi]

I haven't used such software, but do you think a 4C/4T CPU would be enough? If so, you could go for 3200G for about 4k less.
Also, you could find MSI B450M Pro VDH Max for about 1k cheaper than the one you've picked.

I'd try to add dual channel 3200MHz RAM & CX 450, if I were you.

 

[kalph09]

Chiptronics Z810 has limited space to mount a hard disk. You are limited to one SSD. Secondly, those fans are noisy. You need to replace them with something quieter.

Back to your query. What is the minimum hardware requirement to run those software? If it runs on any hardware, you can look at R3 3200G that could save you 3-4k.

 

[Leshy]

@BullettuPaandi & @kalph09 thanks for the suggest the total on amazon is 29k the current setup. but my dad would use this machine for say the next 5 years what about future proofing the ryzen 3 is around 1.5 years old already is a 3rd gen i3 laptop which failed today
what about DP-MATX-MATREXX30-SI cabinet... What about Deepcool PSU

 

[gourav]

Don't get Matrexx 30, get Matrexx 40. 30 is too small, things don't fit inside too well. 40 shouldn't be that much more expensive.

Also, for SSD, try to get WD Blue SN570. If not, you can get used ones from the market here. P3 is QLC, not great for longevity.

 

[DestGod]

My dad uses certain software ex. DVSwitch for his hobby. Nope, he does not stream. https://en.wikipedia.org/wiki/Amateur_radio
Below i have attached a config need your suggestions

Amazon isn't the best place to buy PC components, I would recommend looking into bigger names like MD and Vedant Computers to get the lowest prices.
Consider this as a starting point - https://pcpricetracker.in/b/s/a8c0d705-b2a1-4867-9dbc-b90ce14ae2cc
Or this for an AMD build. - https://pcpricetracker.in/b/s/4bedd8a1-68d9-4834-a84b-ee555b382dce

Not sure if you need more power than this, if an ameature radio can run on decent specs, better RAM and SSD would bring very little difference while costing a bit more.

Forget future proofing now, PC hardware change too fast, so its best to buy whatever available now. Both the i3 10100 and Ryzen 5 5600G are plenty enough for simple usage.

 

[Leshy]

Don't get Matrexx 30, get Matrexx 40. 30 is too small, things don't fit inside too well. 40 shouldn't be that much more expensive.

Also, for SSD, try to get WD Blue SN570. If not, you can get used ones from the market here. P3 is QLC, not great for longevity.

unable to find Matrexx 40 on amazon pls suggest alternatives
@DestGod I am from Madurai TamilNadu thanks for the tip though will hunt around locally

 

[chandrakant.d]

I recommend to check used market for cpu ram & cabinet. You can easily save 10k there. Use same config as vignesh suggested.

 

[Leshy]

AMD Ryzen 5 5600G - 11600

GIGABYTE B450M DS3H V2 - 6900

Crucial RAM 16GB DDR4 (8x2) - 1300 * 2 - 2600

Crucial P3 1TB PCIe 3.0 - 4800

GIGABYTE GP-P450B 80 Plus Bronze Power Supply - 2700

DEEPCOOL DP-MATX-MATREXX30-SI - 3800

Total - 32,400

got the prices from a local vendor in madurai!

 

[DestGod]

Avoid the Gigabyte PSU, this one is better- https://www.amazon.in/Cooler-Master-Bronze-Certified-Non-Modular/dp/B08GTF8224/ref=sr_1_1?crid=30R93GL7PIDUE&keywords=coolermaster+450w&qid=1684845754&sprefix=Coolermaster+45,aps,482&sr=8-1
Yes, it's about 600 more, but will give you a better peace of mind over the Gigabyte PSU, primarily because of prior quality concerns.

Also make sure that the BIOS in the motherboard is updated to support 5600G.

If the cabinet is 3800, it's overpriced. This is better for 2.5k

 

[Leshy]

AMD Ryzen 5 5600G - 11600
GIGABYTE B450M DS3H V2 - 6900
Crucial RAM 16GB DDR4 (8x2) - 1300 * 2 - 2600
WD Blue SN570 1TB PCIe 3.0 - 4800
Corsair CV450 SMPS - 2900
DEEPCOOL DP-MATX-MATREXX 40 - 3100
Total - 31900

 

[Leshy]

Guys I happened to stumble upon this listing ASUS High Performance Mini PC or SKULLSAINTS Rudra or Panther your thoughts ?

 

[gourav]

If you want to go for a mini PC, take a look at this https://shop.clarioncomputers.in/product/intel-nuc-10-gen-nuc10i5fnh5/

A 10th gen i5 is better than 8th gen i7 and it's new, not refurbished. I have not heard of skullsaints, so no opinion on those as a whole. However, as far as the processor goes, N5105 is going to perform poorly, would not recommend at all. Even the N95, which is supposedly Alder Lake, performs slightly worse than 10th gen i5 I shared above. Pricing is reasonable though.

 

[Leshy]

AMD Ryzen 5 5600G - 11600
GIGABYTE B450M DS3H V2 - 6900
Crucial RAM 16GB DDR4 (8x2) - 1300 * 2 - 2600
WD Blue SN570 1TB PCIe 3.0 - 4800
Corsair CV450 SMPS - 2900
Antec NX292 - 3400
Antec A400i @ 1700
Assemble & OS - 1000

Total - 34,900

The NUC / mini PC wouldn't work out for my dad since it doesn't have expandable PCIe slots
got a quote from delta page chennai decided to go with them

AMD Ryzen 5 5600G @ 11400 nett
GIGABYTE B550M DS3H @ 9000 nett
Crucial RAM 2x 8GB 3200Mhz DDR4 @ 1550 x 2
WD Blue SN570 1TB PCIe 3.0 @ 5000
Corsair CV550 SMPS @ 4100
Corsair Case 110R @ 3800 nett

Total = Rs 36400 nett

 

[earagav]

expandable PCIe slots

Keep in mind that the 5600G doesnt support PCIe 4.0.

 

[LazyTitan]

Instead of amd, you can go Intel also as I don't see many people suggesting it.
CPU - i3 12100f/i5 12400f - 6k/14k
Mobo - Asus h610/b650 - 8k/13k
Remaining things same as above threads

 

[Leshy]

i am personally an AMD fanboy