magesh85
Disciple
Hi Guys,
Not the latest, but could not find the topic here,hence posted.
An AOSP ROM has been leaked for Mi3. And the Best part is we can install AOSP in System 1 and MIUI in System 2.
The below steps will explain how to do this,
1) Take a CWM backup of your current MIUI ROM and copied to somewhere else ( your pc or sd card etc )
2) Go to recovery , wipe data/factory reset
3) Wipe cache and Wipe dalvik cache
4) Format System1 and System 2
5) Format data
6) After that, Enable TDB from the advanced section inside the recovery (Select wipe when it asked)
7) Once it is finished, then Select the Reboot recovery option and wait for few seconds for the recovery area.
8) Choose install ZIP then select the CM package and flash it to the System1 when it asked ( IT IS IMPORTANT THAT AOSP OR CM BUILD MUST BE IN SYSTEM 1 AND MIUI ON SYSTEM2, else it will ended up with boot loop). Also flash Google apps into the same system
9) After that , reboot the recovery again
10) Go to restore -> select CWM backup of your previous MIUI ROM -> Restore to system 2
11) Once it is restored, select the active system which one you need to boot. you can choose either system1 or system2 from the advanced active system option.
12 ) Reboot the device and do fun with both builds without having any trouble or force closed.
The Steps are taken from XDA
http://forum.xda-developers.com/xiaomi-mi-3/help/easy-flashing-guide-cm-miui-using-tdb-t2868411
You can get the ROM from the developer site.
http://www.miui.com/thread-2000597-1-1.html
Not the latest, but could not find the topic here,hence posted.
An AOSP ROM has been leaked for Mi3. And the Best part is we can install AOSP in System 1 and MIUI in System 2.
The below steps will explain how to do this,
1) Take a CWM backup of your current MIUI ROM and copied to somewhere else ( your pc or sd card etc )
2) Go to recovery , wipe data/factory reset
3) Wipe cache and Wipe dalvik cache
4) Format System1 and System 2
5) Format data
6) After that, Enable TDB from the advanced section inside the recovery (Select wipe when it asked)
7) Once it is finished, then Select the Reboot recovery option and wait for few seconds for the recovery area.
8) Choose install ZIP then select the CM package and flash it to the System1 when it asked ( IT IS IMPORTANT THAT AOSP OR CM BUILD MUST BE IN SYSTEM 1 AND MIUI ON SYSTEM2, else it will ended up with boot loop). Also flash Google apps into the same system
9) After that , reboot the recovery again
10) Go to restore -> select CWM backup of your previous MIUI ROM -> Restore to system 2
11) Once it is restored, select the active system which one you need to boot. you can choose either system1 or system2 from the advanced active system option.
12 ) Reboot the device and do fun with both builds without having any trouble or force closed.
The Steps are taken from XDA
http://forum.xda-developers.com/xiaomi-mi-3/help/easy-flashing-guide-cm-miui-using-tdb-t2868411
You can get the ROM from the developer site.
http://www.miui.com/thread-2000597-1-1.html