Give me the output for
root@DD-WRT:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
ramfs on /tmp type ramfs (rw)
devpts on /dev/pts type devpts (rw)
devpts on /proc/bus/usb type usbfs (rw)
/dev/discs/disc0/part1 on /opt type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/discs/disc0/part2 on /mnt type ext3 (rw,noatime,nodiratime,data=ordered)
root@DD-WRT:~#
root@DD-WRT:~# ps
PID USER VSZ STAT COMMAND
1 root 1180 S /sbin/init noinitrd
2 root 0 SW< [kthreadd]
3 root 0 SW< [ksoftirqd/0]
4 root 0 SW< [events/0]
5 root 0 SW< [khelper]
48 root 0 SW< [kblockd/0]
60 root 0 SW< [khubd]
77 root 0 SW [pdflush]
78 root 0 SW [pdflush]
79 root 0 SW< [kswapd0]
80 root 0 SW< [aio/0]
670 root 0 SW< [scsi_tgtd/0]
676 root 0 SW< [mtdblockd]
689 root 0 SW< [dwc_otg]
709 root 0 SW< [scsi_eh_0]
710 root 0 SW< [usb-storage]
849 root 1320 S resetbutton
939 root 0 SW [RtmpCmdQTask]
979 root 1116 S telnetd
996 root 728 S dnsmasq --conf-file=/tmp/dnsmasq.conf
1062 root 1252 S ttraff
1239 root 4928 S /usr/sbin/smbd -D --configfile=/tmp/smb.conf
1417 root 1772 S httpd -p 80
1501 root 1248 S process_monitor
1512 root 628 S cron
1665 root 0 SW< [kjournald]
1667 root 0 SW< [kjournald]
1821 root 1748 S /opt/bin/httpd -p 8080 -h /opt/share/www
1826 root 1456 S /opt/sbin/xinetd
1830 root 2344 S nmbd
1857 root 628 S udhcpc -i vlan2 -p /var/run/udhcpc.pid -s /tmp/udhcpc
1876 root 4628 S /opt/bin/transmission-daemon
1878 root 4628 S /opt/bin/transmission-daemon
1879 root 4628 S /opt/bin/transmission-daemon
1880 root 4628 S /opt/bin/transmission-daemon
1881 root 4628 S /opt/bin/transmission-daemon
1882 root 1132 S -sh
1920 root 1116 R ps
root@DD-WRT:~#
then whatever is the output of ps check for something like this in ps outout
/opt/bin/transmission-daemon -g /opt/data/torrents/.c
Essentially i need to know which transmission settings file are you using , so on which partition is the config file located show me the output using
Code:
cat /opt/data/torrents/.config/transmission-daemon/settings.json | grep download
root@DD-WRT:~# cat /opt/data/torrents/.config/transmission-daemon/settings.json | grep download
"download-dir": "/opt/data/torrents",
"download-limit": 100,
"download-limit-enabled": 1,
root@DD-WRT:~#
your config file might me on /mnt so ps tells where is located
For file transfer issue
Download Filezilla enter I.P of router and username as root and passwd of your router page, vsftp is part of optware package which we installed and once ftp'ed it gets started on its own so no manual starting of services this is preferred over Samba since samba is over resource hog process.