vivek.krishnan

Update - Finished the build successfully. Used an old 12v 5A "plastic" supply that was in another build and did not face any drop in...

Yes, but when life gives no options, what to do, change machine or kill SSD? IMO XP to 7 was the biggest change in terms of device...

No , He did not do the second MAC thing in front of me . I was too , but it did not work . Traceroute were exact same with both ONU

Sorry to be a bother, but can you also post temps with 2 HDDs - preferably WD Red equivalent HDDs along with the HDD temps as well.

Sorry about the delay stuck with work. I was able to test the N100 unit for the past 1.5 hours below are its results: Idle temp - No AC...

Will the ads also load before the app :p

Please post the temps if possible. And after sales service? This is not something that we would replace that easily. I have the...

He mentioned the usb sound plays, so something is getting detected.

Do you find out which was the second MAC and where it was on your system? I am a bit skeptical.

It was not working as they had something called Dual MAC verification. It was successfully dialling PPPOE using device cloned MAC back...

As someone who has purchased nearly 50+refurbs and some with 4GB, I do know what i am talking about. Even if you put a 7200rpm HDD...

@rockyo27 those are rj45 ports. @vivek.krishnan I have 2 ;)

If used in office, stick to Windows Pro as that is what you are licensed for. LTSC variants are meant for specific tasks devices only...

Freezing method did not work, so that a no go. Another method is to disable automount on Windows, connect the HDD and try a recovery...

If you know, you know :playful: