it is actually full-width, it can take in full-length x16 cards but negotiate its speed down to x8 not x4
Yes, I still have a few available.
To all those who were waiting for it, I have 5 x i5 9500T CPUs in stock and 5 x P330 in stock, to be sold as a bundle @ Rs. 14000/- for CPU + Barebones
To all those who were waiting for it, I have 5 x i5 9500T CPUs in stock and 5 x P330 in stock, to be sold as a bundle @ Rs. 14000/- for CPU + Barebones
Last edited:
Received this today. Everything works fine. thank you @aasimenator
I only have 3 units left now with an i5 9500T processor, No barebones are available.
This will be the last batch, I don't have any more P330s to sell.
This will be the last batch, I don't have any more P330s to sell.
thumbs up @aasimenator
great device at great price.
I just deployed it as an opnsense load balancer. Despite the bad power management on freebsd (as against say debian or even windows), it’s drawing just 15W at the wall (actual load).
I know a 9500t is extreme overkill for this but i was almost about to purchase a protectlii clone with a celeron for a slightly higher price on amazon.com so this is a much much better buy .
For anyone wondering about the fit, printing the stl shared by @aasimenator on the previous page is good enough to secure the pcie card.
great device at great price.
I just deployed it as an opnsense load balancer. Despite the bad power management on freebsd (as against say debian or even windows), it’s drawing just 15W at the wall (actual load).
I know a 9500t is extreme overkill for this but i was almost about to purchase a protectlii clone with a celeron for a slightly higher price on amazon.com so this is a much much better buy .
For anyone wondering about the fit, printing the stl shared by @aasimenator on the previous page is good enough to secure the pcie card.
Attachments
Yep I got this bracket printed with black abs .05mm fdm.. Looks good and keeps the card sturdy.
Btw are you using load balancer to combine 2 isp connections or load balancing some self hosted service?
i self printed with PLA so its a little soft (notice the crack near the screw ) - but again, don't think i am ever going to wrestle with that card so should be fine
I am using opnsense more as a 3 WAN failover setup.
WAN1 is primary (Airtel fiber), WAN 2 is Jio 4G LTE for failover for those random days when Airtel fiber goes down - happens somewhat regularly in Pune unfortunately.
WAN3 is HSG LAN with a shared WAN .
Failovers are within a few seconds so we often dont even realize there is an outage till until someone starts moaning on the HSG whatsapp group
HSG? How do you manage 3 uplinks with 3 ports? Or wan 3 is where wan1+2 traffic goes?i self printed with PLA so its a little soft (notice the crack near the screw ) - but again, don't think i am ever going to wrestle with that card so should be fine
I am using opnsense more as a 3 WAN failover setup.
WAN1 is primary (Airtel fiber), WAN 2 is Jio 4G LTE for failover for those random days when Airtel fiber goes down - happens somewhat regularly in Pune unfortunately.
WAN3 is HSG LAN with a shared WAN .
Failovers are within a few seconds so we often dont even realize there is an outage till until someone starts moaning on the HSG whatsapp group
The housing society i live in. It’s again an Airtel fiber line so it’s usefulness as a backup is kinda moot but since it’s there, might as well.
Since its a not reallly ever in active use except rarely, WAN 3 is via a USB Tp-link adapter. Its a Realtek (8193 i think) chipset and was plug & play on opnsense.
I also got one, pretty smooth deal and very decent pricing, thank you, @aasimenator
thank you, @aasimenator
Sorry to bother you all, but does anyone want to sell their P330 with pcie riser? (or trade with HP 600G4 which also has dual nvme but no pcie slot)
This was sold to @abmr2d2
Back by popular demand, I have managed to get my hands on 20 x the same P330 but these do not come with any riser card. instead, comes with HDD Tray & cable.
So if you want the Riser, it will have to be bought separately, I have sourced around 10 of these risers right now. but I am trying to source more, they are just costly and harder to find
In general, the pricing has increased and has been increasing for the past few months, I've been told imports have slowed down related to refurbished systems, so those that have stock are charging a premium.
P330 Barebones Only = Rs. 6000/-
P330 Barebones + 1 Year Warranty = Rs. 7000/-
P330 Barebones + Riser = Rs. 7500/-
P330 Barebones + Riser + 1 Year Warranty = Rs. 8500/-
The warranty is again valid for non-physical damage, in case of any physical damage (burn marks etc. and water damage) warranty will be void, Also you need to ensure that any signatures on the system are maintained and not removed.
As before, full system options are available as well, you can combine it with any compatible CPU of your choice, just DM me with your request and I will see what's available or can be arranged.
Attachments
Last edited:
Hello everyone
Currently, I have the following CPUs in stock with the P330:
1. P330 + i5 8500 + 90W adapter = Rs. 13000/- ( 1 available)
2. P330 + i5 9500 + 90W adapter = Rs. 15000/- ( 1 available)
3. P330 + i5 9500T + 65W adapter = Rs. 15500/- ( 3 available)
FREE COMPLIMENTARY 1-YEAR WARRANTY on any of the above combos
8 barebones and a few combo's already sold, both on the forum and outside, get them while they are hot
Currently, I have the following CPUs in stock with the P330:
1. P330 + i5 8500 + 90W adapter = Rs. 13000/- ( 1 available)
2. P330 + i5 9500 + 90W adapter = Rs. 15000/- ( 1 available)
3. P330 + i5 9500T + 65W adapter = Rs. 15500/- ( 3 available)
FREE COMPLIMENTARY 1-YEAR WARRANTY on any of the above combos
8 barebones and a few combo's already sold, both on the forum and outside, get them while they are hot
This P330 just got more versatile
Here it is running MacOS Sonoma 14.1.1
Here it is running MacOS Sonoma 14.1.1
And here I am running 4x NVMe SSDs XD
3 of them are at gen 3x4, one at gen 3x1 (8GT/s still)
Last edited: