Hi guys,



I have bought all these components



Phenom II X3 720BE

Biostar TA790GX A2+

Palit GTS 250 512mb

Kingston 4gb ddr2 800mhz

WD 640gb hdd

Crossair VX450

Zebronics bijli cabinet





I have got a few questions regarding the installation of these components.



1) Do i have to change some jumper setting on the mobo.



2) Should i clear the cmos before booting it for the first time.



3) Is there an critical thing that i have to configure in bios. (i know i have to choose the primary and secondary hdd, but anything apart from that, something related to voltage etc..)



4)My cabinet came with a small wire with a black round speaker. The end of the wire has speaker written on it. Do i have to use it. I think the mobo already has that black round speaker.





Sorry for being such a noob

I am doing this for the first time. I just dont want to screw up anything.

Also let me know if there is anything important that i might need to know

1st ques: No don't change any jumper settings on the mobo



2nd ques: No need to clear CMOS



3rd ques: No need to change anything from BIOS. Just disable 3rd boot device if any. Set first boot device as CD-ROM as u'll need to install XP/Vista on it. And second as Hard disk



4th ques: If u think that speaker is on that board then its ok. Speaker is not important.



Important: Don't forget to apply thermal paste on ur processor and then insert it on ur motherboard. That's it.