Recent content by Pauljacob750

Received the switch. Leaving Feedback

I also found a supplier named Prime Source (https://www.primesource.in/index_rackmountchassis.htm) for a 4U rackmount chassis. They quoted me 15k + GST for the RM 4002 chassis which can handle 10x 3.5-inch HDDs.

Another thing to note that 2.5Gbps support on the router end which you can check here: https://github.com/Anime4000/RTL960x/blob/main/Docs/2.5Gb.md. AFAIK for most NICs you only get 1Gbps speeds as they only have 1G/10G support with exceptions like the Broadcom BCM57810S.

Hmm, won't the attenuator make the RX more -ve?

Rx seems to be stable now. This is the temp without the fan. I didn't experience any drop in speed, so it could be due to the low RX. Surprisingly, at -30 dBm, I got my max speed of 400 Mbps. I will ask my ISP to change the cable if I see any drop again...

I checked again, and it seems to be ok. I will try to check what happens without the fan in the eventing

Current temp is 35. ISP speeds were throttling without the fan. Will do some tests w/o fan and post the results...

Using mine in a M720Q with a MCX3. It gets quite hot so needs a fan to operate. Have connected a Noctua to a 12v adapter for now to cool it...

Purchased 1x FS.COM Gigabit SFP adapter.

Hey wanted to know if you imported these from China directly from HSGQ?

I am selling my Xeon workstation. Local buyers only. Not open to selling parts individually. Kindly note that no GPU, PSU, and NVMe SSD will be provided with the system. All parts are out of warranty. Boxes for cabinet, Arctic fans, and SSD will be provided. Parts list: Item no. Part...

Received the drives. They were packaged well and are as described. Leaving feedback...

Package received, will leave feedback soon...

Okay so the MR600 had a similar issue. TP-Link released beta firmware to address the issue...

I use 4G regularly on Jio with on a S23U, as the upload speeds are better for me. I don't know why this is the case for dongles...