MOBO Sugesstion !!! Very Urgent

Hi guys, i am planning to replace my current mother board due to over heating problem. I am considering to buy Either MSI P45 Zilent or the P5Q-E. The price range i am looking for is max 11k. I have the E8500 proc, I am into OC, Please suggest as what shall i buy.

Both are good sturdy boards, heard Asus have improved their ASS in India, not sure how MSI warranty works tho

P45 is the way to go. however if i were you i'd not rush into things while spending a sum like that n wait for some expert opinion.

Asus P5Q-E would be a better option IMHO

What is overheating??

+1..

overheating sounds like a lame excuse to upgrade (no offence)

asus P5Q-E is the best within reach ....

by the way what is exactly overheating, CPU?

which mobo u r using?

^^it conerns with the chip, mosfets, transistors, any component tht emits heat more than the normally desirable limits....

And what is ur current motherboard which's overheating???

I had p5q Pro with E8400, when OC the temps were really high (Core 1 -56, Core 2 - 57) all the test were failing due to this, So I ended up changing the processor & got a E8500. But sadly there was no change in the temp. Also changed the Cooler but still the same prob.

Finally decided to change the MOBO.

Besides OC issue's, there are certain issue as the system goes really slow at times without even running any kind of application & this happened with both the proc E8400 & E8500. So changing my MOBO is the last resort, if the issue isn’t solved will literally throw the pc out of the window

Please make a video if u do tht.....

Don't make an hasty decision The cpu might be overheating due to improperly seated hsf, or dried up thermal paste,excessive voltage, or some other reason.
The system slow might be due to an unstable OC, or some problem with windows, or a highly fragmented hdd, etc.

Post your complete rig specs, and OC settings. Maybe someone here could guide you.

Here are the specs

Mobo: Asus p5q pro
Proc: Intel E8500
Ram : OCZ reaper 4 G.b (2x2)
Gfx : HD4850 512 DDR 3
SMPS: Cooler Master 600W
HDD : 500 x 3 & 250 x 1
Cabinet: Chieftech
Cooler: Zalman 9700 Led
External Fans: 120 x 2 & 90 x 2
Samsung DVD writer.
OS: Windows Vista 64 bit ( Formatted at least 2/3 times)

OS is installed in the WD 500Gb hdd & Has just 2 partition.The partition on the OS is just meant for that & have not installed much on that.

After the Heating Issue's , I haven't over clocked at all. So its running at default speed of 3.16ghz.

Have Installed the cooler various time & each time applied the thermal paste.

Please suggest shall i buy the MOBO as i have tested everything else & i am quite dissapointed with the performance, my earlier spec E6600 with P5b Deluxe was better & Faster then this.

what software are you using to check for temperatures?

and how do you know that its the mobo which is overheating? the P5Q Pro as such is considered to be a REALLY good board and has quiet a few users here on TE.

So far i have used Real temp, Everest & Core Temp for test the temp. Orthos & OCCT both failed when overclocked.