FS: CM Cavalier mid tower cabinet

Status
Not open for further replies.
Gannu

Gannu

Unbanned
ex-Mod
Selling my 2yr old CM Cavalier 3 cabinet;

Color----------------------------------------Black
Dimensions--------------------------(W)202 x (H)435 x (D)500
Weight------------------------------------- -10.4kg
Material---------------------------Aluminum Bezel, SECC Chassis
Motherboards----------------------------ATX; micro ATX
5.25" Drive Bay---------------------------5( Exposed )
3.5" Drive Bay------------------------1(Exposed),4 ( Hidden )
I/O Panel--------------USB 2.0*2, IEEE 1394*1, MIC*1, SPK*1,(Support HD Audio)
Cooling System---------1*80mm Front Fan (Intake), 1*120mm Rear Fan (Exhaust)
Expansion Slots-------------------------------7

Here:
Cooler Master - Ultimate provider of Computer Case, Cooler & Power Supply

The cabinet was purchased from SMC International, Delhi for 4.2k during May '06;

I'd attempted a few mods on this one out of which some turned out being good and some very bad, so I leave it for the pics to speak out the same;

Few gripes in the cabinet:

1. At the top; paint has gone; requires repainting;

2. At the inside; plastic latches; due to the usage of thinner for removing the paint there, the plastic dissolved itself :ashamed:;

3. Back-plate for mounting the motherboard; some holes were drilled for using zip-ties for a better cable management; these holes were not drilled according to the proper dimensions; some metal was cut near the PSU are for letting the 24pin ATX connector to be managed across that;

Pics:


















Few good things:

1. The front bezel looks perfect; no scratches, no paint;

2. The side panel has a 120mm hole [near CPU] and an 80mm hole [near gfx card] cut in the acrylic sheet;

3. A 120mm hole was cut in the acrylic sheet placed on top;

4. Some Autografix bullet hole stickers. :D

My suggestion:

Do a total repainting inside [like how KMD does] and on the top and the cabinet looks much better. :)

Shipping:

Shall be done thru DTDC ground; Have the original box with me; Shipping ~150 bucks or as actuals;

PM me if anyone's interested; Scammers pl keep away; :)
 
No adi, there're few fugly paint jobs n gripes. :( Unfortunately due to my bad modding skills; hence the low price;

Look at those pics; [Last 2 for eg.]
 
^^Jayanta, pl have a good look at the pics; :)

Meanwhile gcbeldar has sent a PM for confirming; So on hold for him;

Goes to u, if he backs out; :)
 
Shakensoul said:
No probs, let me know if he backs out :)

Perfect for trying my modding skills on the cabby :devil2:
Click to expand...

Ok no probs;

1. gcbeldar;

2. Shakensoul;

3. Hanzy

4. Sunny

Hmmm.. I see.. My pricing wasn't too good it appears; :lol: J/k;
 
BIKeINSTEIN said:
Insanely low price. :p
Click to expand...

Cant help it Rishi; :p

Just want to get rid of the thing; lying idle for more than 6months;

Besides u may want to check those pics 'carefully'; :p
 
gannu said:
Besides u may want to check those pics 'carefully'; :p
Click to expand...

Maybe you should take a 'careful' look at the 4-5 yrs old, rusted, mangled, dirty, bought for 1K odd something, tin cans that people still try to sell for 700-800 bucks. :hap2:
 
BIKeINSTEIN said:
Maybe you should take a 'careful' look at the 4-5 yrs old, rusted, mangled, dirty, bought for 1K odd something, tin cans that people still try to sell for 700-800 bucks. :hap2:
Click to expand...

:ashamed: oh.. No clue.. Anyhow.. Let someone take this for a good cause and I hope u understood the relevance of the statement. ;)
 
Status
Not open for further replies.
Back
Top